Iimveliso

  • Isixhobo sangaphakathi nesangaphandle sePost Grinder kwiLathe

    Isixhobo sangaphakathi nesangaphandle sePost Grinder kwiLathe

    I-lathe tool post grinder sisixhobo somatshini esisetyenziselwa ukulola imiphetho yokusika izixhobo ezixhonywe kwipali yesixhobo kwi-lathe.Ingasetyenziselwa ukucola iibevels zezixhobo ezijikayo kunye nokulola iincam zezixhobo ezikruqulayo.

     

  • HSS Annular Cutter kunye Weldon Shank

    HSS Annular Cutter kunye Weldon Shank

    I-HSS annular cutter ifanelekile ukusika izinto ezinzima.

    Umphetho wokusika onokuthi unqumle ngokulula ngesinyithi, iplastiki, kunye nezinye izinto ezinzima.

    I-annular cutter nayo yomelele kakhulu, iyenza ibe lukhetho olukhulu lokusetyenziswa kobunzima.

  • LUNGISA I-Taiwan AL-500P Ukutya koMbane

    LUNGISA I-Taiwan AL-500P Ukutya koMbane

    Umzekelo: AL-500P

    RPM:0-160

    Ubukhulu bePPM:160

    Ixabiso leGear ye-Beval Drive: 21.4: 4.8: 1

    ITorque enkulu: 780 ku-lb(900Kgf/cm)

    Ukulinganiswa kwamandla ombane : 110V 50/60HZ

    Ikalwe ngoku: 1Amp

  • ALSGS AL-510S sereis feed amandla

    ALSGS AL-510S sereis feed amandla

    I-AL-510S ifakwe kwi-X-AXIS ,Y-AXIS,Z-AXIS yomatshini wokusila ngelixa i-AL-510SX ifakwe kwi-X-AXIS,AL-510SY ifakwe kwi-Y-AXIS,AL-510SZ ifakwe kwi-Z. -AXIS.

    Voltage – 110V ngokungagqibekanga , 220V-240V ozikhethelayo.

    Intambo yamandla - intambo yase-US;E-UK, EU, ngokuzithandela.Sithumela intambo echanekileyo ngokwenqanawa yakho ukuya kwilizwe.

    Max Torque - 650in-ib

    Ubunzima - 7.20 KGS

  • Umatshini weMagnetic Core Drill kwi-35mm 50mm okanye i-120mm yoMmandla

    Umatshini weMagnetic Core Drill kwi-35mm 50mm okanye i-120mm yoMmandla

    Umatshini wokugaya imagnethi ulungele ukugrumba ngentsimbi.Iimagnethi ezinamandla zenza indawo eqinileyo ngelixa i-drill bit ijikeleza, isenza kube lula ukugqobhoza nakweyona ntsimbi ingqindilili.Umatshini kulula ukuwusebenzisa kwaye uza neendidi ngeendidi ze-drill bits ongakhetha kuzo.Ukuba ujonge indlela elula nesebenzayo yokubhoboza ngentsimbi, ungajongi ngaphaya komatshini wokomba wemagnethi.

  • Slotting Head attachment kumatshini wokungqusha

    Slotting Head attachment kumatshini wokungqusha

    Intloko yokubeka umatshini wokugaya ilungele ukudala iindawo zokubeka kwizinto ezahlukeneyo.

    Ngolwakhiwo lwayo oluchanekileyo kunye noyilo olulula ukuyisebenzisa, le ntloko ye-slotting yongezwa kakhulu kuwo nawuphi na umatshini wokungqusha.

  • Uhlobo lwe-QKG oluPhakamileyo lweSixhobo seVise

    Uhlobo lwe-QKG oluPhakamileyo lweSixhobo seVise

    Uhlobo lwe-QKG lweSixhobo soMenzi weVise yi-vise echanekileyo eyenziwe ngetsimbi ekumgangatho ophezulu efakwe kwi-carburized kwi-surface hardness ye-HRC58~62.

  • QGG-C uhlobo precison isixhobo vise nge groove

    QGG-C uhlobo precison isixhobo vise nge groove

    1. I-Precision Vises yenziwe ngentsimbi ekumgangatho ophezulu efakwe kwi-carburized to surface hardness: HRC58~62
    2. Parallelism 0.005mm/100mm, squareness 0.005mm
    3. Ngokukhawuleza ukubamba kwaye kulula ukusebenza
    4. Isetyenziselwa ukulinganisa ngokuchanekileyo, ukuhlolwa, ukucola okuchanekileyo, i-EDM, kunye nomatshini wokusika ucingo.
    5. Qinisekisa ukuchaneka okuphezulu kuyo nayiphi na indawo

  • Uhlobo lwe-QGG oluchanekileyo lwesixhobo se-vise

    Uhlobo lwe-QGG oluchanekileyo lwesixhobo se-vise

    1.I-Precision Vises yenziwe ngentsimbi ekumgangatho ophezulu efakwe kwi-wsurface hardness: HRC58~62
    2. Parallelism 0.005mm/100mm, squareness 0.005mm
    3. Ngokukhawuleza ukubamba kwaye kulula ukusebenza
    4. Isetyenziselwa ukulinganisa okuchanekileyo kunye nokuhlola, ukucola okuchanekileyo, i-EDM kunye nomatshini wokusika ucingo.
    5. Qinisekisa ukuchaneka okuphezulu kuyo nayiphi na indawo

  • Umatshini wokutsala waMandla wokuzoba

    Umatshini wokutsala waMandla wokuzoba

    Ikuvumela ukuba utshintshe izixhobo kumatshini wokungqusha ngokukhawuleza (malunga nemizuzwana emi-3)
    Kuba umatshini wokusila weBridgeport
    Kulula ukuyifaka.Sebenzisa kwakhona i-drawbar ekhoyo.
    Ibaleka emoyeni wevenkile kuphela.Ayifuni mbane.
    Kubandakanya ukutshintshwa kwe-pneumatic kunye neyunithi yokucoca umoya rhoqo kwi-lubricator (FRL).

  • Round Type Fine Pole Permanent Magnetic Chuck

    Round Type Fine Pole Permanent Magnetic Chuck

    1. Inokufakwa kumatshini wokusila ojikelezayo

    2. Ukuchaneka okuphezulu kunye namandla amakhulu emagnethi, intsalela yemagnethi ephantsi

    3. Uhlobo lwe-Micropitch lufanelekile i-workpiece encinci kunye nencinci

    4. Uhlobo lwepitch olucokisekileyo lulolona cwecwe lomsebenzi omkhulu kunye nongqindilili

    5. Iimveliso zinokwenza ngokweemfuno zomthengi

  • Fine Pole Magnetic Chuck for Surface Srinder

    Fine Pole Magnetic Chuck for Surface Srinder

    Eyona nto isetyenziswayo kunye neempawu zeMagnetic Chuck

    1. Ukudibanisa kakuhle kubuso obuthandathu.Isebenza kwi-grinder yomhlaba, umatshini we-EDM kunye nomatshini wokusika umgca.

    2. Indawo yepoli ilungile, amandla eMagnetic asasazwa ngokufanayo.Isebenza kakuhle kumatshini ocekethekileyo kunye nomncinci wokusebenzela.Ukuchaneka kwetafile yokusebenza ayitshintshi ngexesha lemagneti okanye demagnetizing.

    3. Iphaneli ngokucutshungulwa okukhethekileyo, ngaphandle kokuvuza, ithintela ukubola ngokusika ulwelo, yandisa ubomi bokusebenza kwaye yenza kube lula ukusebenza ixesha elide kwi-cutting fluid.